How to install garden lights

1. It is advisable to use low-power high-color-rendering high-pressure sodium lamps, metal halide lamps, high-pressure mercury lamps and incandescent lamps to install courtyard light sources.

2. Grounding of garden lights The grounding of garden lights should be strictly observed. The metal pillars and the exposed conductors of the lamps should be connected to the PEN line reliably. No less than two points are connected to the trunk line of the grounding device.

3. Power-on trial operation After the lamps have been installed and passed the insulation test, the power-on trial operation is allowed. After power on, you should carefully check and patrol to check whether the control of the lamps is flexible and accurate; whether the switch corresponds to the control sequence of the lamps. If any problems are found, the power should be turned off immediately to find out the cause and repair it.